Cabinet rule 5181
Cabinet rule 5181 - Image 2

SKU: 5181010001

Cabinet rule 5181

EUR11.44

Available in central stock
Quick facts

Additional Information

Weight0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Description

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Additional Information

Weight0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Reviews

There are no reviews yet

Be the first to review “Cabinet rule 5181”

Your email address will not be published. Required fields are marked *

You may also need to

Screw 9 nickel-plated TKFS 3X16 per piece

EUR0.37

Add to Cart

Screw 19 galvanized TFS 3.5×19 mm per piece

EUR0.37

Add to Cart

Screw 19 zinc plated TFS 3,5×19 mm 10 pack

EUR3.20

Add to Cart

Screw 9 nickel plated TKFS 3X16 10 pack

EUR3.20

Add to Cart

Related products

Single hook

Single hook in nickel-plated or untreated brass. Common during the period 1920 – 1965. Screw included.

Price range: EUR5.03 through EUR5.49

Soap with scrub almond

Round mild soap with wheat bran scrub and creamy almond oil. The soap is scented with cardamom and vanilla essential oils.

EUR8.69

Sponge brush

Fresh mushrooms lose flavor when rinsed in water – dirt and soil should therefore be brushed or cut away. This handy oiled birch and horsehair mushroom brush effectively removes dirt and debris without damaging the mushrooms.

The brush also works great as a bread brush when baking with molds with small and detailed patterns as the round shape makes it small and flexible.

EUR13.63

Brick shelf

Tray shelf of the turn of the century type after Gysinge’s own model. For storage of serving trays, larger dishes, plates, etc. with a depth of up to 4.5 cm.

Untreated pine. Hand carved.

Tips! In the kitchen in Gysinge, Gästrikland, we also use it as a magazine rack.

EUR136.79

Kitchen stove rod nickel-plated 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom.

MATERIAL Made of solid nickel-plated brass. Polished shiny surface, but not lacquered. The model was common from the late 1800s until the 1930s. Highest quality.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In that case, you should place another wall bracket over the joint and buy an extra coupling bracket.

EUR382.01

Kitchen stove rod brass 1.5 m complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in bathrooms. The model was common from the late 1800s until the 1930s.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP! The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, a wall bracket should be placed over the joint.

EUR447.44

Related articles

There are no related articles for this product.

Cabinet rule 5181

Model: Albert Karlsson Metallfabriksbolag "Ticka Standard"

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.