SKU: 5181010001

Cabinet rule 5181

EUR11.44

Available in central stock
Quick facts

Andreas Skatter

Weight 0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Description

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Andreas Skatter

Weight 0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Reviews

There are no reviews yet

Be the first to review “Cabinet rule 5181”

Your email address will not be published. Required fields are marked *

You may also need to

Related products

Single hook

Single hook in nickel-plated or untreated brass. Common during the period 1920 – 1965. Screw included.

Price range: EUR5.03 through EUR5.49

Cabinet rule 5181U

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

Without striker plate. Used as a handle on cabinet doors with other closing mechanisms, such as magnetic locks or self-closing hinges. The cabinet handle does not have a latch and therefore does not require drilling in the door.

For placement, see article number 5181.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use screwdrivers, not screwdrivers.

Screw not included.

Matching screw number 19

EUR8.69

Red fruit brush

Root vegetable brush in oiled birch and union mix. Union mix is strong and water resistant. This is a superb brush for scrubbing potatoes and root vegetables.

EUR13.63

Flowerpot

Hand-turned flowerpots and saucers of the traditional variety. Flowerpot production became an industry and mass production in Sweden around the turn of the century 1900. Before then, all pots were made by hand, as were the saucers. The profession was called pottery. Typical of handmade pots is that you can see the potter’s hands in the ware. The imprints from the hand-turning process create low ridges on the surface and show through on the outside. A hand-turned pot is therefore not as smooth as a machine pot, it is more personal and has more life and variety. A detail that also reveals the real craftsmanship is the soft, rounded rim at the top. It can certainly be made by machine, but it will never be as soft and individual as on a hand-turned pot.

EUR49.87

Kitchen stove rod brass 80 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s.

MATERIAL Highest quality. Sand-cast brass. Polished shiny surface, but not lacquered. The brass darkens over time if not polished.

Length with knobs 80 cm

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, you should use a so-called coupling sleeve and place a wall bracket over the joint.

Also available in nickel-plated version.

EUR300.58

Kitchen stove rod brass 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Lastly, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint and an additional coupling fitting should be purchased.

EUR332.60

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.