SKU: 5181010001

Cabinet rule 5181

EUR11.44

Available in central stock
Quick facts

Additional Information

Weight0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Description

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Additional Information

Weight0.1 kg
Material

Stainless steel, Steel end plates

Surface treatment

Polished stainless steel, End plate untreated

Reviews

There are no reviews yet

Be the first to review “Cabinet rule 5181”

Your email address will not be published. Required fields are marked *

Related products

Soap with scrub lavender

Mild and creamy soap with the scent of essential lavender and lavender flowers.

Weight 96 g. Height 3 cm. Diameter 6,5 cm

EUR8.69

Sponge brush

Fresh mushrooms lose flavor when rinsed in water – dirt and soil should therefore be brushed or cut away. This handy oiled birch and horsehair mushroom brush effectively removes dirt and debris without damaging the mushrooms.

The brush also works great as a bread brush when baking with molds with small and detailed patterns as the round shape makes it small and flexible.

EUR13.63

Bath brush horsehair

Oak and horsehair bath brush with good grip for the hand.

Tagel is an excellent material for bath brushes as it is soft and pliable while being strong and durable and has some resilience.

Together with a good soap, it provides a soft and pleasant lather for a perfect clean. The hollow tag transports moisture, which means that if you knock out the water properly after use, the tag will feel as good as dry.

Allow the brush to dry hanging or standing on the tag so that the water is transported away from the wood, which is more sensitive to moisture.

EUR20.59

Kitchen stove rod brass 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Lastly, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint and an additional coupling fitting should be purchased.

EUR332.60

Kitchen stove rod nickel-plated 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom.

MATERIAL Made of solid nickel-plated brass. Polished shiny surface, but not lacquered. The model was common from the late 1800s until the 1930s. Highest quality.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In that case, you should place another wall bracket over the joint and buy an extra coupling bracket.

EUR382.01

Kitchen stove rod nickel-plated 155 cm complete

Kitchen stove rod with sturdy hooks for kitchen utensils, potholders, pots etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 1800s until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint.

EUR519.26

Related articles

There are no related articles for this product.

Cabinet rule 5181

Model: Albert Karlsson Metallfabriksbolag "Ticka Standard"

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.