SKU: 3041-73

Wall plate for ring line button with slot

EUR14.18

Available in central stock
Quick facts

Additional Information

Weight0.02 kg
Diameter

67 mm

Thickness

11 mm

Material

birch, untreated

Wall plate for ring main switch. The wooden plate provides stability for the electrical installation and at the same time serves as a decorative base for the ring circuit breaker. The plate is provided with countersunk screw holes and is mounted with the backside milled channel in vertical direction.

Diameter 67 mm, thickness 11 mm, with grooves. Birch, untreated.

Description

Wall plate for ring main switch. The wooden plate provides stability for the electrical installation and at the same time serves as a decorative base for the ring circuit breaker. The plate is provided with countersunk screw holes and is mounted with the backside milled channel in vertical direction.

Diameter 67 mm, thickness 11 mm, with grooves. Birch, untreated.

Additional Information

Weight0.02 kg
Diameter

67 mm

Thickness

11 mm

Material

birch, untreated

Reviews

There are no reviews yet

Be the first to review “Wall plate for ring line button with slot”

Your email address will not be published. Required fields are marked *

Related products

Twisted cord 3-ply white

Old-style twisted textile cable. White with a silver twist. Approved double insulated and 3-wire (grounded).

Silk-covered, glossy surface. Dimensions: 3 x 0.75 mm2.

Purchased per whole meter. No right of return on this item as it is made to measure.

EUR7.23

Twisted cord 3-ply gold

Gold-colored twisted textile cable in old-fashioned style. Yellow with a gold twist. Approved double insulated and 3-wire (grounded).

Silk-covered, glossy surface. Dimensions: 3 x 0.75 mm2.

Purchased per whole meter. No right of return on this item as it is made to measure.

EUR7.23

Bakelite mittenram

Cover bakelite center part.

EUR12.81

Kulodosa porcelain square white

Square junction box in white porcelain for surface mounting. Newly manufactured in a classic model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

EUR26.99

Plejd Kron can dimmer 2x100VA

Krondimmer is a two-channel universal dimmer with output for two different loads for control with a spring-loaded push button or motion sensor. The product can be controlled automatically through built-in time functions such as astro and week clock, as well as wirelessly via the app or other Plejd products. DIM-02 has adjustable minimum, maximum and start level and can handle loads of up to 100 VA per channel.

EUR72.29

Room thermostat 16A white

2-pole electronic room thermostat from Schneider. White, 16A. The thermostat is equipped with an LED that shows green = operation and red = active. 1°C sensitivity. Can be used in temperatures between +5°C to +30°C.

Frame included. Mounted in standard appliance box. If surface mounting is desired, the box is ordered separately.

The design is not identical to the THPG white backlit switch.

EUR148.69

Related articles

There are no related articles for this product.

Wall plate for ring line button with slot

Wall plate for ring main switch. The wooden plate provides stability for the electrical installation and at the same time serves as a decorative base for the ring circuit breaker. The plate is provided with countersunk screw holes and is mounted with the backside milled channel in vertical direction.

Diameter 67 mm, thickness 11 mm, with grooves. Birch, untreated.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.