Black surface-mounted junction box from Schneider. High model for Renova 1-compartment appliances. For switches, wall sockets and dimmers. For vertical or horizontal mounting.

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

Universal dimmer with two separate inputs for control via a spring-loaded push button or motion sensor. The product can be controlled automatically through built-in time functions such as astro and week clock, as well as wirelessly via the app or through other Plejd products. DIM-01 has adjustable minimum, maximum and start levels and can handle loads of up to 300 VA.

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91