Raising plate Spring bracket m 5 mm

SKU: 3031-304-2-1

Raising plate Spring bracket m 5 mm

EUR3.66

Available in central stock
Quick facts

Additional Information

Weight0.15 kg
Intended for

Installation of inward/outward airing fittings

Height

Building 5 mm

Material

brass

An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

Description

An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

Additional Information

Weight0.15 kg
Intended for

Installation of inward/outward airing fittings

Height

Building 5 mm

Material

brass

Reviews

There are no reviews yet

Be the first to review “Raising plate Spring bracket m 5 mm”

Your email address will not be published. Required fields are marked *

You may also need to

Raising plate Weatherstripping fn 5mm

EUR4.12

Add to Cart

Turnstile fittings Inward opening

Price range: EUR56.73 through EUR61.76

Add to Cart This product has multiple variants. The options may be chosen on the product page

Outward-opening brass turnbuckle

EUR60.85

Add to Cart

Related products

Coupling hook with screw

Coupling hook for older windows. A traditional variant that works well for connecting windows.

A hole for fixing, then you let the hook step over the screw head of the corresponding sash and lock it that way.

EUR2.29

Window corner iron pressed

Corner fittings for window sashes based on a model that was common from the end of the 19th century and throughout the first half of the 20th century. Should be filled on the back with window putty, otherwise condensation is likely to occur behind and the window sashes rot under the fittings

EUR3.02

Window corner iron flat

Window corner iron for recessing in the window sash. A common model from the middle of the 19th century to a bit into the 20th century.

Untreated iron. Height 11.3cm, length 11.3cm, width 2.2cm, thickness 1.5 mmm.

ATTENTION! Screw not included. Suitable screw no. 13.

EUR5.40

Window rule 5188 Nickel plated

Model: Aug. Stenman No. 33

Period: 1930-1970

Screw not included.

Matching screw number 11

EUR12.35

Window latch with hook 5176 brass

Model: Lock company N:o 676

Period: 1910-1970

Screw not included.

Matching screw for window latch screw 8 to counter plate screw 6

EUR13.27

Nickel-plated spring ring fittings, outward opening

Weatherstripping for outward opening windows in a solid classical model. Stepped opening and childproof. Nickel-plated. Screw TKFS N 3.5X16 mm for installation included. Template and simple installation instructions included.

The fitting is tested and approved childproof. Also available in untreated brass.

Tips! Sometimes one or more spacers are needed to get the right distance. See related products or ask in our shop.

EUR63.04

Related articles

There are no related articles for this product.

Raising plate Spring bracket m 5 mm

An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.