[currency_switcher]

SKU: 3081-66

Towel roller blind fabric red

325 SEK

Available in central stock
Quick facts

Andreas Skatter

Weight 0,22 kg
Längd

75 cm

Bredd

50 cm

Towel made of roller blind fabric.

The model for this rustic fabric, which is woven especially for Gysinge, comes from a farm in Hälsingland and dates from the early 1800s.The roller blind fabrics are woven with a shuttle in old-fashioned looms and therefore have smooth, fine and strong selvedges, which do not need to be hemmed or cut.

This fabric is a quality product that gets more and more beautiful the more you use it and wash it.

Coarse linen fabric. Cypress technique. The towels have loops at both ends.

Description

Towel made of roller blind fabric.

The model for this rustic fabric, which is woven especially for Gysinge, comes from a farm in Hälsingland and dates from the early 1800s.The roller blind fabrics are woven with a shuttle in old-fashioned looms and therefore have smooth, fine and strong selvedges, which do not need to be hemmed or cut.

This fabric is a quality product that gets more and more beautiful the more you use it and wash it.

Andreas Skatter

Weight 0,22 kg
Längd

75 cm

Bredd

50 cm

Reviews

There are no reviews yet.

Be the first to review “Towel roller blind fabric red”

Your email address will not be published. Required fields are marked *

Washing instructions:

Shrinks up to 9 percent.

Machine wash at least 60 degrees.

Use detergents without bleach.

Hang the fabric fairly wet, so it will be easier to iron.

It is best to cold-iron the fabric when it is slightly damp, or iron it with a steam iron.

You may also need to

Related products

Cabinet rule 5181

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

125 SEK

Screw hook nickel-plated small

Turn-of-the-century screw hook made of solid nickel-plated brass with iron screw part. Common in the past as a clothes hook in rooms and hallways, as a towel rack in kitchens, etc.

Also available in brass. See related products.

Total length about 50 mm, of which the hook 30 mm

145 SEK

Screw hook nickel-plated, medium

Turn-of-the-century screw hook made of solid nickel-plated brass with iron screw part. Common in the past as a clothes hook in rooms and hallways, as a towel rack in kitchens, etc.

Also available in brass. See related products.

Total length approx. 60 mm, of which the hook approx. 43 mm.

165 SEK

Knob board with 4 turned knobs

Coat rack in pine after a model from around 1870. Turned knobs. The board is edged all around with carnis profile. Sturdy and useful for clothes, work clothes, in kitchens for towels and aprons, etc. Was usually painted in the same color as the other carpentry in the room. Two lengths, one with four knobs and one with six.

615 SEK

Kitchen shelf complete

Kitchen shelf in simple Art Nouveau style after a model from around 1905. Originally made as a counter shelf with shelves of rib where household utensils were placed for drainage.

Pine, untreated. One shelf. Length 125 cm, width 28 cm, height (bracket) 340 mm, thickness 2 cm.

Additional freight.

1.645 SEK

Kitchen stove rod nickel-plated 155 cm complete

Kitchen stove rod with sturdy hooks for kitchen utensils, potholders, pots etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 1800s until the 1930s. Highest quality.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

The bar can be shortened by sawing it off. It can also be connected to another pole if a longer version is desired. In this case, a wall bracket should be placed over the joint.

5.675 SEK

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop