[currency_switcher]
Stove clay 5 kg
Stove clay 5 kg - Image 2

SKU: 3021-3

Stove clay 5 kg

395 SEK

Available in central stock
Quick facts

Andreas Skatter

Weight 5,2 kg
Avsedd för

repair of plaster and brick inside tiled stove
Förpackning

5 kg
Innehåll

refractory clay, sand
Tillsätt själv

water until smooth consistency
Notis!

Not intended for the repair of brick or plaster in fireplaces.
Åtgång

normally sufficient for 2-3 tiled stoves

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

Description

Tiled stove clay for the renovation of tiled stoves where the firebox has weathered internally. The main reason for using clay is that it has the ability to expand and absorb and distribute the pressure generated by the heat. The properties of clay make the kiln durable and safe and prevent the tiles from bursting and leaking. Never use cement or concrete in a tiled stove as this makes renovation and removal/replacement difficult, or in some cases impossible.

Pack of 5 kg. Contains refractory clay, ready-mixed with sand (1 part clay flour and 3 parts sand). Normally sufficient for 2-3 tiled stoves. Only water needs to be added.

Instructions are included, but they are also available as a PDF under Documents (at the Add to cart button).

Andreas Skatter

Weight 5,2 kg
Avsedd för

repair of plaster and brick inside tiled stove
Förpackning

5 kg
Innehåll

refractory clay, sand
Tillsätt själv

water until smooth consistency
Notis!

Not intended for the repair of brick or plaster in fireplaces.
Åtgång

normally sufficient for 2-3 tiled stoves

Reviews

There are no reviews yet.

Be the first to review “Stove clay 5 kg”

Your email address will not be published. Required fields are marked *

Dokument

Instruction Tiled stove clay

You may also need to

Tiled stove joint

155 SEK

Add to cart

Refractory clay mortar

435 SEK

Add to cart

Spark grid for tiled stove

895 SEK

Add to cart

Related products

Damper chain nickel plated

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

90 SEK

Butterfly tassel 1900s brass

The 20th century damper tassels, which were attached to the damper chains and cords of the tiled stoves, are usually just turned, unlike the 19th century, which really looked like real tassels. We have now produced such a neat 1900s model with fine turning and attention to detail. The tassels are available in two versions, in brass for tiled stoves with brass doors and in nickel-plated brass for stoves with nickel-plated doors.

125 SEK

Dam solution

Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

155 SEK

Tassel tassels 19th century

Damper tassels were a common decorative detail on tiled stoves, wall vents, etc. from the mid-19th to the early 20th century. The tassel was locked by a knot at the end of the damper chain and served both as a pull knob and decoration. Gysinge’s own production.

205 SEK

Spiral bud

Spiral knob of old standard model for iron stoves. chromed iron. The knob can be tightened to make it shorter, or lengthened by loosening the screw with a screwdriver.

339 SEK

Soot hatch pressed nickel plated

Soot hatch on black plate support. Available in both polished brass and bright nickel-plated. Suitable as a soot hatch on tiled stoves, in walls, etc.

575 SEK

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop