Round scraper 40 mm

SKU: 3071-24-40

Round scraper 40 mm

EUR26.99

Available in central stock
Quick facts

Additional Information

Weight0.12 kg

Round brush used to apply linseed oil paint before modding. A wiper (40 mm) . The wiper is wound between the brush and the handle. As the bristles wear and become shorter, the brush becomes a little blunt. By unwinding a couple of turns of string, you can regain sufficient length and tension on the brush

Wooden handle, black hog bristle. Own production. Highest quality.

Description

Round brush used to apply linseed oil paint before modding. A wiper (40 mm) . The wiper is wound between the brush and the handle. As the bristles wear and become shorter, the brush becomes a little blunt. By unwinding a couple of turns of string, you can regain sufficient length and tension on the brush

Additional Information

Weight0.12 kg

Reviews

There are no reviews yet

Be the first to review “Round scraper 40 mm”

Your email address will not be published. Required fields are marked *

You may also need to

Related products

Cane stick

Sturdy and strong cane stick of planed pine. Sufficiently strong for you to dare to “grab” and stir in paint cans with heavy bottoms. Long enough to fit cans from two deciliters to three liters. Drilled hanging hole so that you can dry and reuse the stick.

EUR0.92

80 grit sandpaper

Sandpaper made of specially coated paper that makes the paper tough and extra durable. The paper does not break when wrapped around the edges of a sanding block. Can also be used on a sander. Suitable for sanding wood, metal and filler.

EUR1.37

Spackle Rubinol 100 grams

Environmentally friendly linseed oil-based wood filler for minor indoor wood repairs. No solvents or chemicals. Can be surface treated.

METHOD: Remove dust and dirt. Trowel with a soft spatula and wipe off excess trowel with a damp cloth.

Can be sanded and advantageously finished with linseed oil paint.

Utensils are cleaned with water.

EUR5.40

Shellac brush 20 mm

Many customers have asked for a special brush for shellacing twigs. The problem is that they don’t want to use ordinary, expensive brushes for this, because they have to be cleaned separately in methylated spirit and not in turpentine. And you want a long brush so that you can also reach the ceiling panels. The shellac brush is the answer to these wishes.

Black bristles. Wooden handle. Total length 32 cm.

EUR6.41

Element brush short handle 50 mm

Chinese hog bristle 90 tops, straight top, untreated old wood handle. Used when painting small or confined spaces, where you want “access”.

ADVICE AND CARE INSTRUCTIONS:

To remove loose bristles, always soap-wash a new brush before use.

As the brushes contain pure natural bristles, it is essential that the bristles are not exposed to drying solvents, without re-greasing the bristles afterwards.

Before use: Oil the entire brush (with cooking oil, rapeseed oil, or similar) for a few days. Then soap wash out the brush.

After painting with water-based paints and “older” paints, e.g. egg oil tempera, glue paint, wash the brush thoroughly with soap and water.

After painting with oil-based paints, use a non-drying cleaner. Always finish with a soap wash.

It is important to smell the brush, properly washed out it only smells of soap or possibly pig bristles.

For longer painting breaks, lubricate the brush with soap and shape the brush so that it does not “bounce”, store the brush like that. You can also hang the brush in a container with oil and “forget about it”. This will keep the brush in good condition until the next season’s use.

ATTENTION! Linseed oil poses a risk of spontaneous combustion in rags and tangles!

EUR39.35

Oval scraper special 65 mm

For painting large surfaces, holds a lot of paint.

Chinese hog bristle 90 tops, straight top, untreated alder wood handle. Fully molded, no water pockets.

Pig bristles. Handle of alder. Thickness 65 mm.

EUR41.63

Related articles

There are no related articles for this product.

Round scraper 40 mm

Round brush used to apply linseed oil paint before modding. A wiper (40 mm) . The wiper is wound between the brush and the handle. As the bristles wear and become shorter, the brush becomes a little blunt. By unwinding a couple of turns of string, you can regain sufficient length and tension on the brush

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.