[currency_switcher]
Pin apparatus, Frame master

SKU: 3061-6

Pin apparatus, Frame master

2.175 SEK

Available in central stock
Quick facts

Andreas Skatter

Weight 0,57 kg

The stapler for stapling window glass. Especially suitable for old window frames with thin, hand-blown window glass and shallow putty seams. The machine does not scratch the glass. The machine has a reversible magazine and can shoot pins that are 10 or 16 mm long.

Turning of magazines:

Unscrew the screw located at the bottom of the “nose” of the machine. Turn the magazine over and replace the screw.

Fletcher Frame master. Weight 0.5kg

Description

The stapler for stapling window glass. Especially suitable for old window frames with thin, hand-blown window glass and shallow putty seams. The machine does not scratch the glass. The machine has a reversible magazine and can shoot pins that are 10 or 16 mm long.

Turning of magazines:

Unscrew the screw located at the bottom of the “nose” of the machine. Turn the magazine over and replace the screw.

Fletcher Frame master. Weight 0.5kg

Andreas Skatter

Weight 0,57 kg

Reviews

There are no reviews yet.

Be the first to review “Pin apparatus, Frame master”

Your email address will not be published. Required fields are marked *

You may also need to

Pin for pin machine, 5000 pins

525 SEK

Add to cart

Pin hammer

530 SEK

Add to cart

Related products

Pin wire 25 pcs

Pin wire in 25-pack

Pre-connected metal wire of the right hardness and with the right cut for glazing windows. Suitable for windows with generous putty seams.

Old-fashioned type pin wire. Best nailed with a tack hammer

 

65 SEK

Linseed oil putty

Traditional linseed oil putty based on linseed oil and chalk, kneaded to the desired consistency and applied with a putty knife.

Painting: Should always be painted over. Overpaint at the earliest after 3 to 4 weeks, but can also be overpainted with linseed oil paint immediately after puttying.

Meets the requirements for antiquarian renovation.

Instructions for use of linseed oil putty:

During application, the putty must not be exposed to high temperatures or solar heat, as it may dry too quickly with the risk of wrinkling the surface. Oil-based putty is affected differently depending on the type of paint. Samples are recommended before painting.

Keep the kit in a cool place before use.

Linseed oil putty is a perishable product, so what is not used can be placed in the freezer to be thawed the next time you need putty.

Price range: 89 SEK through 359 SEK

Wallpaper brush

A wallpaper brush is normally used to smooth the wallpaper on the wall when wallpapering. Brush over the wallpaper to smooth it out and avoid bubbles and creases. Work up and down and from the center out to the sides. Wash the brush in water after use to keep it soft.

The wallpaper brush can also be used for grain painting. It is ideally suited to the “long straw” technique, a kind of simple striped grain that makes the stained surfaces slightly, slightly striped, much like knotless wood. This technique is commonly used on beadboard, linings and moldings (however, cores, flaming, etc. are usually painted, especially on door mirrors, to more accurately imitate real wood).

Wooden handle, black horsehair and synthetic blend brush. Length 21 cm, height 7 cm

170 SEK

Extra panel sheet

Spare blade for scraping smooth surfaces such as facades etc.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is ground so as not to lose the unique profiles.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

240 SEK

Boomerang scraper

For scraping fine joinery, e.g. window frames, mirrored doors, moldings and furniture.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

375 SEK

Profile scraper

For scraping profiled surfaces and rough carpentry.

Scraper blade in special abrasive steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

375 SEK

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop