Nub to cardboard tension 0.5 kg

SKU: 3031-180

Nub to cardboard tension 0.5 kg

EUR15.46

Available in central stock
Quick facts

Andreas Skatter

Weight 0.5 kg
Consumption

0.5 kg nubb/30 – 40 running meters or about 25 sqm of chipboard.
Pouch

0.5 kg (ca 720 pcs)
Length

approximately 20 mm

Special nub for e.g. tensioning roofing and wall paper, for wallpapering etc. Thanks to its particularly sharp edge, the nub can first be pressed into the substrate by hand and then nailed with a hammer. 0.5 kg of nub is enough for 30-40 running meters or about 25 sqm of stretching paper.

Hand-forged iron.

Description

Special nub for e.g. tensioning roofing and wall paper, for wallpapering etc. Thanks to its particularly sharp edge, the nub can first be pressed into the substrate by hand and then nailed with a hammer. 0.5 kg of nub is enough for 30-40 running meters or about 25 sqm of stretching paper.

Andreas Skatter

Weight 0.5 kg
Consumption

0.5 kg nubb/30 – 40 running meters or about 25 sqm of chipboard.
Pouch

0.5 kg (ca 720 pcs)
Length

approximately 20 mm

Reviews

There are no reviews yet

Be the first to review “Nub to cardboard tension 0.5 kg”

Your email address will not be published. Required fields are marked *

You may also need to

Chipboard

EUR6.86

Add to cart

Cardboard corners 110 cm

EUR8.24

Add to cart

Matt linseed oil paint White

Price range: EUR15.46 through EUR163.79

Select options This product has multiple variants. The options may be chosen on the product page

Stubble strip 50 m

EUR13.63

Add to cart

The big book on building conservation

EUR40.72

Add to cart

Pin hammer

EUR48.50

Add to cart

Related products

Clip nail 2.5″

A cut-off nail is a machine-forged nail with a conical blade and a round head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails.

Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR0.27

Clip nail 5″

A cut-off nail is a machine-forged nail with a tapered blade and a flat or semi-circular head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails. Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR0.92

Nails for window fittings 0.5 kg

Also suitable for window fittings after 1850, which are normally always nailed. Not galvanized, which makes painting easier.

ATTENTION! The arch wood should be pre-drilled to avoid cracking. Expect a consumption of about 40 nubb per window of two arches.

EUR16.01

Rivet forged with nut

Threaded rivet of iron with hand-forged head and square nut. The heads are flat and the rivets are therefore suitable for building fittings, but are primarily intended for furniture that needs to be riveted, such as tops for impact tables. An invaluable spare part for the furniture renovator!

Circle dimensions: length 30 mm, forged skull. Shank 6 mm. Square nut dimensions 13×13 mm

EUR20.13

Clip nail 2,5″ 100 pcs

A cut-off nail is a machine-forged nail with a conical blade and a round head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails. Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR20.59

Clip nail 4″ 100 pcs

A cut-off nail is a machine-forged nail with a tapered blade and a flat or semi-circular head. The tapered blade allows the nail to be pulled out without cracking the wood. After straightening the nail, it can be used again – unlike modern nails. Cut nails began to be produced in the latter part of the 19th century and gradually replaced hand-forged nails. The nail is cut from heavy steel plate, hence the name. In general, nails can be divided into the following categories of use.

  • 2.5 inches. For moldings, linings and interior joinery.
  • 3 inches. For nailing beadboard panels etc. internally. For nailing board lining on the outside.
  • 4 inches. For board lining and for nailing cover strips on the outside.
  • 5 inches. For nailing floors etc. internally.

EUR51.70

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.