[currency_switcher]
Flowerpot
Flowerpot - Image 2
Flowerpot - Image 3

SKU: 2130

Flowerpot

545 SEK

Make a choise
Quick facts

Andreas Skatter

Weight N/A
Färg

White, Blue, Gray, Green, Yellow

Hand-turned flowerpots and saucers of the traditional variety. Flowerpot production became an industry and mass production in Sweden around the turn of the century 1900. Before then, all pots were made by hand, as were the saucers. The profession was called pottery. Typical of handmade pots is that you can see the potter’s hands in the ware. The imprints from the hand-turning process create low ridges on the surface and show through on the outside. A hand-turned pot is therefore not as smooth as a machine pot, it is more personal and has more life and variety. A detail that also reveals the real craftsmanship is the soft, rounded rim at the top. It can certainly be made by machine, but it will never be as soft and individual as on a hand-turned pot.

Hand-turned terracotta clay pot.

Tips! As the pots are made of clay, they are not completely watertight. Place the pot on paws or similar to avoid moisture under the saucer. We do not recommend planting directly in the pot.

Description

Hand-turned flowerpots and saucers of the traditional variety. Flowerpot production became an industry and mass production in Sweden around the turn of the century 1900. Before then, all pots were made by hand, as were the saucers. The profession was called pottery. Typical of handmade pots is that you can see the potter’s hands in the ware. The imprints from the hand-turning process create low ridges on the surface and show through on the outside. A hand-turned pot is therefore not as smooth as a machine pot, it is more personal and has more life and variety. A detail that also reveals the real craftsmanship is the soft, rounded rim at the top. It can certainly be made by machine, but it will never be as soft and individual as on a hand-turned pot.

Andreas Skatter

Weight N/A
Färg

White, Blue, Gray, Green, Yellow

Reviews

There are no reviews yet.

Be the first to review “Flowerpot”

Your email address will not be published. Required fields are marked *

You may also need to

Related products

Cabinet rule 5181

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

125 SEK

Tile beveled edges 15x15cm 0,5 sqm

The Gysinge tile is a beveled tile for bathrooms and kitchens of a model that was common in Sweden in the late 19th and early 20th centuries. Several Swedish tile manufacturers existed at the time, including Ekeby Bruk in Uppsala.

What distinguishes Swedish tiles from international models is that Swedish tiles are usually square, not rectangular, and that they are available in so many parts, including half-tiles, borders and moldings, that a complete set can be made. The tiles are thick and strong and have a vibrant surface precisely because they are handmade and fired in old kilns. The glazing is also done by hand, which further enhances the rustic impression. All tiles are labeled “Gysinge” on the back.

1.795 SEK

Kitchen stove rod brass 80 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom. The model was common from the late 19th century until the 1930s.

MATERIAL Highest quality. Sand-cast brass. Polished shiny surface, but not lacquered. The brass darkens over time if not polished.

Length with knobs 80 cm

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are carefully screwed into the wall. The hooks and brackets are then screwed onto the bar. Last of all, tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, you should use a so-called coupling sleeve and place a wall bracket over the joint.

Also available in nickel-plated version.

3.285 SEK

Pantry shelf complete

A well-made three-tiered shelf modeled on a pantry in Gävle from the 1890s. A good example of the care that was put into the carpentry of even the simplest of living spaces.

4.695 SEK

Kitchen stove rod brass 1.5 m complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in bathrooms. The model was common from the late 1800s until the 1930s.

MATERIAL Made of solid brass or in nickel-plated version. Polished shiny surface, but not lacquered. The brass darkens over time if you do not polish it.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP! The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In this case, a wall bracket should be placed over the joint.

4.890 SEK

Agave in copper sheet 15 leaves

The agave plant (Latin agave americana) is a classic outdoor plant for more lavish plantings in castles and mansions, for example.

True agave is a Mediterranean plant that in our climate requires greenhouses in winter. For this reason, it has also only been found on wealthier farms with orangeries or other means of frost-free winter storage.

Most often the agaves were planted in cast iron urns, mostly in pairs at the main entrance, or on the gate posts.

Alongside the genuine agaves, there have also been imitations in painted black plate.

Tin roofs do not grow too big. They can also withstand freezing temperatures. If they are skillfully painted, they can look so much like their predecessors that no one can tell the difference. There’s just one problem – over time, the metal rusts and the paint wears off.

Our developed agaves are therefore made of specially colored copper sheet. By using green-colored copper plate already during production, we have come extremely close to the appearance of the original plant.

The scarring starts when the plants are placed outdoors, and the resulting color changes make the “fake” agave look even more like the real thing over the years.

The tin roofs, which are a piece of qualified Swedish copper warehousing, are delivered ready assembled, just to stick into a pot with sand or soil, or directly into the bed.

11.950 SEK

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop