Sliding rule in forging long

SKU: 3031-87

Sliding rule in forging long

EUR102.94

Available in central stock
Quick facts

Andreas Skatter

Weight 0.55 kg

Hand forged bolt, long model for external doors. Used for double doors where one door leaf is intended to be fixed and the other openable. Common model from the end of the 18th century to the middle of the 19th century. Long sliding bolt is mounted at the top of the door and short at the bottom. Can be used both as surface-mounted or recessed fittings. Supplied together with a closing plate for the door frame.

Hand forged linseed oil fired iron. Length 30 cm. Width 4 cm.

Description

Hand forged bolt, long model for external doors. Used for double doors where one door leaf is intended to be fixed and the other openable. Common model from the end of the 18th century to the middle of the 19th century. Long sliding bolt is mounted at the top of the door and short at the bottom. Can be used both as surface-mounted or recessed fittings. Supplied together with a closing plate for the door frame.

Andreas Skatter

Weight 0.55 kg

Reviews

There are no reviews yet

Be the first to review “Sliding rule in forging long”

Your email address will not be published. Required fields are marked *

You may also need to

Sliding bolt ungalvanized small

EUR11.80

Add to cart

Sliding bolt ungalvanized large

EUR13.27

Add to cart

Shooting rule in throwing cards

EUR93.79

Add to cart

Related products

Barley slurry

Iron strike plate for locks of the turn of the century type 1900. For lock bolt max 15 x 50 mm. Fits both right and left locks.

EUR10.98

Escutcheon forged 18th century type

Hand-forged key plate for 18th century chamber locks and other locks with a similar key size. The pointed oval shape of the plate is typical of the 18th century, but the model remains even a few decades into the 19th century.

The key plate has four drilled holes for nails and a suitable model of hand-forged nail is our one-inch nail.

The facts

Hand forged iron. Untreated. Height approx. 85 mm, width 45 mm, thickness 2 mm.

Nailed with hand-forged nails 1 inch.

EUR19.22

Angle end plate 18th century type

Angle strike plate for 18th century type chamber locks without night bolt. Available in several designs that fit our different variants of 18th century chamber locks.

EUR43.46

Chamber lock 1850s small left

A fine chamber lock, typical of the mid-19th to early 20th century. Well made work with fine details in brass. Equipped with a locking knob to be locked from the inside. Available in both left and right models. Reversible. Molded key included. Untreated iron.

EUR113.00

Chamber lock turn of the century small left

Solid chamber lock, typical of the late 19th century until the 1940s. Well made work with fine details in brass. Equipped with a locking knob to be locked from the inside. Available in both left and right models. Brass push button. Cast key included. Untreated iron, brass

EUR134.05

Counter chest chamber lock 18th century and night bolt

Counter chest for chamber lock of 18th century type for locks without night bolt. Normally associated with double doors, so-called deadbolt doors. The counter chest is mounted on the fixed door leaf, and the lock itself is mounted on the wicket door. Can sometimes also be mounted on single doors. In this case, the counter chest is mounted on the door frame itself.

EUR178.43

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.