Pin hammer

SKU: 3061-21

Pin hammer

EUR48.50

Available in central stock
Quick facts

Andreas Skatter

Weight 0.2 kg

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Head of special steel, shaft of hickory.

Description

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Andreas Skatter

Weight 0.2 kg

Reviews

There are no reviews yet

Be the first to review “Pin hammer”

Your email address will not be published. Required fields are marked *

You may also need to

Related products

Glass cutter oil, 75 ml

Oil for our glass cutter

EUR6.86

Abrasive kit for paint scrapers

Sharpen the blades of your paint scrapers and keep them sharp for more effective paint scraping.

This sharpening kit, specially designed for sharpening scraper blades for speedheater window scrapers, includes 2-pack ceramic abrasive cloths and a simple blade holder for easier sharpening.

EUR13.27

Extra profile sheet

Spare blade for scraping e.g. profiled facades and rough carpentry.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is ground so as not to lose the unique profiles.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

EUR21.96

Extra boomerang leaf

Spare blade for scraping fine joinery, e.g. window frames, mirrored doors, moldings and furniture.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is ground so as not to lose the unique profiles.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

EUR21.96

Profile scraper

For scraping profiled surfaces and rough carpentry.

Scraper blade in special abrasive steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

EUR34.31

Glass cutter with oil container

Very suitable glass cutter for old uneven window glass. Brass handle that also serves as a container for cutting oil. Valve that regulates the amount of cutting oil. Articulated head. Cuts both straight and round cuts with a light pressure. Carbide wheels with extremely long life. Suitable for most glass thicknesses.

Tips!
Always hold the glass cutter steady in your hand, for example by always placing your index finger on the screw of the cutter head. Always cut in the same direction. Only cut clean glass panes. Listen for the sound of a cotton sheet being torn apart – the glass cutter will run perfectly.

EUR53.53

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.