Hand-forged key plate for 18th century chamber locks and other locks with a similar key size. The pointed oval shape of the plate is typical of the 18th century, but the model remains even a few decades into the 19th century.

The key plate has four drilled holes for nails and a suitable model of hand-forged nail is our one-inch nail.

The facts

Hand forged iron. Untreated. Height approx. 85 mm, width 45 mm, thickness 2 mm.

Nailed with hand-forged nails 1 inch.

Hand-forged hasp of simple model, type 1700-1800s. The smaller model fits well as a hasp on cabinet doors and wardrobes.

Two forged 35 mm badges are included.

Hand-forged bolt, short model for external doors. Used for double doors where one door leaf is intended to be fixed and the other openable. Common model from the end of the 18th century to the middle of the 19th century. Long sliding bolt is mounted at the top of the door and short at the bottom. Can be used both as surface-mounted or recessed fittings. Supplied together with a closing plate for the door frame.

Interior door lock intended for room doors after the middle of the 19th century, when there was a transition from surface-mounted chamber locks to recessed so-called mortise locks. The lock is a 3-keeper lock with 44 different key combinations and can be locked from both the outside and inside.

The lock has recess dimensions according to older standards. Therefore, it is often suitable from the late 1800s onwards. For this lock, our prints and knobs fit, as well as accessories in the form of key plates, rosettes, long plates, etc.

Lock body and lock plate in galvanized steel. Supplied with two keys and strike plate. The latch bolt is reversible when dismantled, i.e. a right-hand lock can be turned into a left-hand lock and vice versa. Counter plate included. Equal locking with the same key for several locks can be specially ordered. Pin depth 4.5 cm