Sharpen the blades of your paint scrapers and keep them sharp for more effective paint scraping.

This sharpening kit, specially designed for sharpening scraper blades for speedheater window scrapers, includes 2-pack ceramic abrasive cloths and a simple blade holder for easier sharpening.

For scraping smooth surfaces such as facades etc.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

The scraper is extra deep to easily collect the soft paint

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedeheater System.

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Very suitable glass cutter for old uneven window glass. Brass handle that also serves as a container for cutting oil. Valve that regulates the amount of cutting oil. Articulated head. Cuts both straight and round cuts with a light pressure. Carbide wheels with extremely long life. Suitable for most glass thicknesses.

Tips!
Always hold the glass cutter steady in your hand, for example by always placing your index finger on the screw of the cutter head. Always cut in the same direction. Only cut clean glass panes. Listen for the sound of a cotton sheet being torn apart – the glass cutter will run perfectly.