Highly sought after spare parts for renovating old floor lamps. Black plastic plug, grounded.

Smooth, round black porcelain ball box for surface mounting. Newly manufactured according to traditional model.

4 break walls on opposite sides.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box in place with suitable screws. Connect the cables. Screw the upper part in place with the appropriate screw.

Square porcelain junction box for surface mounting. Newly manufactured in traditional model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91