Switch

Double frame in black bakelite for wall socket or switch. Dimensions 157 x 82 mm.

From THPG.

Cover frame for separate sockets and switches. Does NOT fit Dimmer and Data sockets.

Round base plate in untreated beech. Mainly intended for mounting Fontini surface-mounted switches and sockets in recessed wall boxes.

The bottom plate can be painted in any color.

Base plate with two compartments in untreated beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.

The bottom plate can be painted in any color.

ATTENTION! When installing in a recessed wall box where the base plate is combined with two sockets or switches, two separate wall boxes are required.

Base plate with three compartments in untreated beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.

The bottom plate can be painted in any color.

ATTENTION! When installing in a recessed wall box where the base plate is combined with three sockets or switches, three separate wall boxes are required.

Base plate with three compartments in dark stained beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.

ATTENTION! When installing in a recessed wall box where the base plate is combined with three sockets or switches, three separate wall boxes are required.

Brass knob in classic design that fits Fontini recessed and surface mounted switches.

Wrath is sold individually.

Black porcelain knob in classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

White porcelain knob in a classic design that fits Fontini’s recessed and surface-mounted switches.

The knobs are sold individually.

Classic recessed switch in white porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

Combine the switch with optional knob and frame sold separately. See related products below.

Classic surface-mounted switch in white porcelain without a knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.

If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall outlet in combination with one of Fontini’s base plates.

For surface mounting on wooden panels or other flammable material, an insulating plastic base plate can be used as additional fire protection.

Combine the switch with the optional knob sold separately. See related products below.

Classic recessed switch in black porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called crown function, which means that it is used to control two separate light sources. The different positions of the knob make it possible to choose whether both light sources should be lit at the same time or only one.

Four positions of the knob:
1. Both light sources off
2. Light source A on
3. Both light sources on
4. Light source B on

Combine with optional knob and frame sold separately. See related products.

Classic recessed switch in white porcelain without knob and frame in a design that was common in Europe in the first half of the 20th century.

This switch has a so-called crown function, which means that it is used to control two separate light sources. The different positions of the knob make it possible to choose whether both light sources should be lit at the same time or only one.

Four positions of the knob:
1. Both light sources off
2. Light source A on
3. Both light sources on
4. Light source B on

Combine with optional knob and frame sold separately. See related products.