Pin wire in 25-pack

Pre-connected metal wire of the right hardness and with the right cut for glazing windows. Suitable for windows with generous putty seams.

Old-fashioned type pin wire. Best nailed with a tack hammer

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Very suitable glass cutter for old uneven window glass. Brass handle that also serves as a container for cutting oil. Valve that regulates the amount of cutting oil. Articulated head. Cuts both straight and round cuts with a light pressure. Carbide wheels with extremely long life. Suitable for most glass thicknesses.

Tips!
Always hold the glass cutter steady in your hand, for example by always placing your index finger on the screw of the cutter head. Always cut in the same direction. Only cut clean glass panes. Listen for the sound of a cotton sheet being torn apart – the glass cutter will run perfectly.