[currency_switcher]
Pin hammer

SKU: 3061-21

Pin hammer

530 SEK

Available in central stock
Quick facts

Andreas Skatter

Weight 0,2 kg

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Head of special steel, shaft of hickory.

Description

Gysinge’s own special tool for driving pins into window frames. The strike of the hammer is square and trapezoidal so that, despite a difficult working angle, the pins can easily be driven in with force. The neck of the hammer is thin and long, so that it is possible to reach even the smallest crevices in a window frame.

Andreas Skatter

Weight 0,2 kg

Reviews

There are no reviews yet.

Be the first to review “Pin hammer”

Your email address will not be published. Required fields are marked *

You may also need to

Related products

Glass cutter oil, 75 ml

Oil for our glass cutter

75 SEK

Putty scraper

For scraping glass and putty seams etc.
Ergonomic handle. The scraper is sharpenable at both ends.

From the Speedheater System.

199 SEK

Profile scraper

For scraping profiled surfaces and rough carpentry.

Scraper blade in special abrasive steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedheater System.

375 SEK

Panel scraper

For scraping smooth surfaces such as facades etc.

Scraper blade in special steel. Designed to reduce power requirements and not damage the wood.
The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.
Ergonomically designed handle.

The scraper is extra deep to easily collect the soft paint

Intended for use when scraping heated paint on wood using the Speedheater methodTM.

From the Speedeheater System.

375 SEK

Glass cutter with oil container

Very suitable glass cutter for old uneven window glass. Brass handle that also serves as a container for cutting oil. Valve that regulates the amount of cutting oil. Articulated head. Cuts both straight and round cuts with a light pressure. Carbide wheels with extremely long life. Suitable for most glass thicknesses.

Tips!
Always hold the glass cutter steady in your hand, for example by always placing your index finger on the screw of the cutter head. Always cut in the same direction. Only cut clean glass panes. Listen for the sound of a cotton sheet being torn apart – the glass cutter will run perfectly.

585 SEK

Pin apparatus, Frame master

The stapler for stapling window glass. Especially suitable for old window frames with thin, hand-blown window glass and shallow putty seams. The machine does not scratch the glass. The machine has a reversible magazine and can shoot pins that are 10 or 16 mm long.

Turning of magazines:

Unscrew the screw located at the bottom of the “nose” of the machine. Turn the magazine over and replace the screw.

Fletcher Frame master. Weight 0.5kg

2.175 SEK

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop